REVIEW US ON GOOGLE
Over 10 years of Roofing Experience
Veteran Owned & Operated
24-Hour Emergency Services Available
Blog Layout
Attic Inspection and the Importance of Proper Attic Insulation
March 18, 2025
Your attic is more than just an extra storage space—it plays a critical role in your home’s overall energy efficiency, indoor comfort, and the longevity of your roof. Regular attic inspections, coupled with adequate insulation, can save you money on energy bills, prevent costly repairs, and create a healthier living environment.
What Is an Attic Inspection?
An attic inspection is a thorough evaluation of the upper part of your home, focused on identifying issues that could affect your home’s performance and structural integrity. During an attic inspection, professionals typically look for:
- Insulation Condition and Levels: Ensuring there is enough insulation and that it isn’t compressed, wet, or damaged.
- Air Leaks: Checking for gaps or openings where air might escape, which can lead to energy loss.
- Ventilation Issues: Assessing whether the attic is properly ventilated to prevent moisture buildup and overheating.
- Structural Integrity: Inspecting for signs of water damage, pest infestations, or deterioration of wooden structures.
- Moisture and Mold: Identifying areas where condensation or leaks might be causing mold growth, which can compromise both health and structural stability.
Regular inspections help homeowners catch problems early, before they turn into major repairs.
Why Attic Insulation Is So Important
Proper attic insulation is one of the most effective ways to improve your home’s energy efficiency and overall comfort. Here’s why it matters:
- Energy Efficiency and Cost Savings: Insulation helps regulate the temperature in your home by reducing the loss of heated air during the winter and keeping hot air out during the summer. This means your heating and cooling systems don’t have to work as hard, which can lead to significant savings on your energy bills.
- Improved Indoor Comfort: A well-insulated attic contributes to a consistent indoor temperature throughout the year. Whether it’s freezing outside or sweltering in the heat, your home stays more comfortable, allowing you to enjoy a more stable living environment.
- Protecting Your Roof and Structure: Inadequate insulation can cause temperature fluctuations that lead to condensation in the attic. Moisture buildup not only promotes mold growth but can also damage roofing materials and structural components. Proper insulation and ventilation work together to keep your roof and attic dry, extending the life of your roof.
- Environmental Benefits: By reducing the energy needed for heating and cooling, proper insulation helps lower your carbon footprint, making your home more environmentally friendly.
- Increased Home Value: Energy-efficient homes are in high demand. Upgrading your attic insulation can improve the marketability of your home and potentially increase its resale value. Tips for Maintaining a Well-Insulated Attic
- Schedule Regular Inspections: At least once a year—or after significant weather events—have your attic inspected by a professional to ensure insulation is intact and there are no issues like leaks or pest infestations.
- Seal Air Leaks: Use caulk or weather-stripping to seal gaps around vents, pipes, and other areas where air might escape. This ensures that the insulation works efficiently.
- Monitor Ventilation: Ensure that your attic has adequate ventilation to prevent moisture buildup. Proper airflow can significantly reduce the risk of mold and prolong the life of your roof.
- Upgrade When Necessary: If your attic insulation is outdated or below recommended R-values for your region, consider upgrading. Modern insulation materials are more efficient and can offer better performance and durability
An effective attic inspection combined with high-quality insulation is essential for maintaining a comfortable, energy-efficient, and structurally sound home. If you’re experiencing higher energy bills, uneven temperatures, or notice signs of moisture in your attic, it might be time for a professional inspection and insulation upgrade.
At Alpha Roofing & Siding Inc. we proudly serve Delaware and Maryland. Our experts are here to help you assess your attic’s condition, recommend the best insulation solutions, and ensure your home is protected against the elements. Contact us today for a free consultation and start enjoying a more comfortable and energy-efficient home!
By taking proactive steps to inspect and insulate your attic, you’re not just maintaining your home— you’re investing in its long-term health and value. Feel free to reach out with any questions or to schedule your attic inspection today!
Measuring a roof accurately is essential for planning repairs, replacements, or new installations. Here are several methods and tips for “measuring up” a roof safely and accurately: 1. The Tape Measure and Ladder Method How It Works: - Measure the Base: Stand at ground level and use a ladder to access the roof safely. Measure the horizontal distance (the “run”) of one side of the roof from the edge of the building. - Determine the Pitch: Place a level on the roof to find the “rise” (vertical distance). Roof pitch is typically expressed as the ratio of rise over run (e.g., 4/12, meaning 4 inches of rise per 12 inches of run). - Calculate the Roof Area: Once you know the dimensions and pitch, you can calculate the true roof area. For example, for a simple gable roof, measure both the length and width of each section and adjust for pitch by multiplying by the square root of (1 + (rise/run)²). Safety Tips: - Always have a second person spot you when using a ladder. - Use proper ladder stabilizers and non-slip shoes. - If the roof is steep or high, consider hiring a professional. 2. Using a Drone for Aerial Measurements How It Works: - Capture Aerial Images: Modern drones equipped with high-resolution cameras can take aerial photos of your roof. - Software Analysis: Many roof measurement apps and software allow you to upload these images. The software then calculates dimensions and areas based on the scale provided. - Benefits: This method is ideal for complex roof shapes or if you want to avoid the risks of climbing a ladder 3. Roof Measurement Apps and Tools Digital Solutions: - Mobile Apps: Tools like RoofSnap, EagleView, or Hover let you input key points and automatically calculate roof area, pitch, and other dimensions. - Laser Measures: Some contractors use laser measuring devices to get precise distances, which are then combined with pitch measurements to calculate the total area. - Benefits: These digital methods can save time and improve accuracy, especially on irregular or multiplane roofs. 4. The Plumb Line Technique How It Works: - Setting Up: A plumb line (a weighted string) can be used from the roof edge to determine a vertical reference. - Measuring Pitch: By measuring the distance from the edge of the roof vertically (rise) and comparing - Usage: This method is particularly useful for pitched roofs and can be combined with tape measure techniques for overall area calculation. 5. Professional Roof Inspections Sometimes, especially for larger or more complex roofs, it’s best to consult a professional. Roofing contractors have the tools and expertise to: - Accurately measure the roof: They combine manual measurements with digital tools. - Identify potential issues: A thorough inspection might reveal hidden damage that could affect overall measurements. - Provide detailed estimates: Knowing the exact dimensions helps in calculating materials needed and overall project cost. Measuring your roof accurately can save time, money, and ensure you order the correct amount of materials. Whether you choose the traditional tape measure method, take advantage of modern drone technology, or use specialized apps, safety and precision are key. If you’re ever in doubt, professional roof measurement and inspection services are available to ensure your project starts off on the right foot For more information on roof inspections, repairs, or professional measurements, contact us at 302- 772-5742 We proudly serve homeowners in Delaware and Maryland, providing reliable and expert exterior improvement services. Feel free to reach out with any questions or for a free consultation on your roofing needs
Choosing the right shingle for your home is an important decision that can impact your curb appeal, energy efficiency, and long-term maintenance costs. Here are some practical tips for homeowners to consider when selecting shingles, covering key aspects like colors, durability, longevity, and overall quality: 1. Consider the Color and Style - Match Your Home’s Aesthetic: Choose a shingle color that complements your home’s exterior, including siding, trim, and landscape. Neutral tones like gray, black, or brown are popular for their versatility, while bolder shades can add character if done right. - Heat Reflectivity: Lighter-colored shingles can reflect more sunlight, which may help reduce cooling costs, especially in warmer climates. - Architectural Style: Consider the overall design of your home. Traditional asphalt shingles work well on classic homes, whereas contemporary designs might benefit from sleek, modern colors or textures. 2. Evaluate Durability and Quality - Material Strength: Look for shingles that are made from high-quality materials. Premium architectural shingles, for instance, offer enhanced durability compared to standard 3-tab shingles. - Wind and Impact Resistance: In areas prone to storms or heavy winds, select shingles that come with strong warranties and are rated for high wind resistance. Look for certifications or technology (such as patented nailing systems) that ensure the shingles stay in place during severe weather. - Manufacturer Reputation: Choose products from reputable manufacturers known for quality and performance. Reviews, warranties, and industry awards can provide insight into a shingle’s long-term performance. 3. Longevity and Warranty - Expected Lifespan: Ask about the estimated lifespan of the shingles. High-quality asphalt shingles typically last 20-30 years, while premium options may extend that range. Some materials, like metal or slate, can last much longer, though they come with a higher upfront cost. - Warranty Coverage: Look for a robust warranty that covers not only manufacturing defects but also installation issues. A longer warranty period is a good indicator of the manufacturer’s confidence in their product’s longevity. 4. Quality of Installation - Professional Installation Matters: Even the best shingles can underperform if they’re not installed correctly. Always use a qualified, experienced roofing contractor who follows manufacturer guidelines and local building codes. - Maintenance and Care: Ask your contractor about maintenance tips that can help extend the life of your shingles, such as regular cleaning and inspections after severe weather events. When picking shingles, balance your priorities: aesthetics, durability, longevity, and quality. Do thorough research, compare different products, and consult with experienced roofing professionals to ensure you’re making an informed choice that suits your home and budget. By investing in the right shingles and proper installation, you’ll protect your home while enhancing its overall value and appearance. If you have questions or need further guidance on choosing the perfect shingles for your home, feel free to contact us at 302-77-ALPHA We proudly serve homeowners in Delaware and Maryland, and our team is here to help you make the best decision for your home’s exterior.
Flat roofs are a popular choice for many commercial, industrial, and even some residential structures due to their sleek appearance and efficient use of space. One of the most important elements of a flat roof is the membrane system, which provides waterproofing and protects the building from the elements. In this post, we’ll explore the common types of roof membranes used for flat roofs and discuss which types of structures are best suited for a membrane roof. What Is a Roof Membrane? A roof membrane is a continuous, flexible layer installed over a flat or low-slope roof. Its primary function is to create a waterproof barrier that protects the underlying structure from water infiltration. Unlike traditional pitched roofs, flat roofs require this specialized system to handle pooling water and prevent leaks, making proper membrane selection critical to the roof’s overall performance. Common Types of Roof Membranes 1. EPDM (Ethylene Propylene Diene Monomer) - Description: EPDM is a durable, synthetic rubber membrane known for its flexibility and longevity. - Benefits: It offers excellent resistance to UV rays, ozone, and extreme weather. EPDM is relatively easy to install and maintain, making it a popular choice for both new installations and roof retrofits. - Typical Uses: Commercial and industrial buildings, as well as some residential flat roofs. 2. TPO (Thermoplastic Polyolefin) - Description: TPO is a single-ply membrane that combines the benefits of a reflective white surface with heat-welded seams for strong adhesion. - Benefits: TPO membranes are known for their energy efficiency thanks to their high reflectivity, which helps reduce cooling costs. They are also resistant to UV rays, chemicals, and punctures. - Typical Uses: Ideal for commercial buildings and warehouses where energy efficiency is a priority. 3. PVC (Polyvinyl Chloride) - Description: PVC membranes are robust, flexible roofing systems that are chemically resistant and highly durable. - Benefits: PVC is resistant to fire, chemicals, and punctures, and its heat-welded seams create a very strong, waterproof bond. Its reflective properties also help improve energy efficiency. - Typical Uses: Frequently used in commercial settings, particularly in areas with exposure to chemicals or heavy industrial use. 4. Modified Bitumen - Description: Modified bitumen systems are built-up roofing solutions that typically use layers of asphalt combined with reinforcing fabrics and a top layer that acts as the membrane. - Benefits: They offer excellent durability and can be installed using heat or cold-applied methods. Modified bitumen roofs are known for their strong resistance to weathering and impact. - Typical Uses: Commonly seen on commercial and industrial buildings, and in cases where a more traditional roofing approach is desired with the benefits of modern materials. What Structures Benefit from a Membrane Roof? 1. Commercial Buildings: Flat roofs with membrane systems are especially popular in commercial construction. Office buildings, retail centers, warehouses, and industrial facilities benefit from the ease of installation, low maintenance, and energy efficiency provided by modern membrane roofing systems. 2. Industrial Facilities: Industrial structures often require robust, chemical-resistant roofing. Membrane systems like PVC are ideal for these environments, offering durability and resistance to harsh chemicals or heavy foot traffic from maintenance personnel. 3. Residential Properties with Flat Roof Designs: While more common in commercial settings, some modern residential designs incorporate flat roofs. These homes can benefit from the energy efficiency and sleek appearance of TPO or EPDM membranes. Additionally, roof decks on residential buildings can be used as outdoor living spaces if properly engineered and maintained. 4. Renovations and Retrofits: Older buildings that are undergoing renovations may switch to a membrane roofing system to address issues like leaks and inefficient insulation. The lightweight nature of these membranes makes them an excellent choice for retrofitting without adding significant structural load. Selecting the right roof membrane is crucial for ensuring long-term performance and energy efficiency, especially for flat roofs that are more susceptible to water pooling. By understanding the benefits and applications of EPDM, TPO, PVC, and modified bitumen, you can make an informed decision that aligns with your building’s needs and local weather conditions. If you’re considering a membrane roof for your commercial, industrial, or residential property in Delaware or Maryland, our team at Alpha Roofing & Siding Inc.is here to help. We offer comprehensive consultations and professional installations that ensure your roof not only looks great but stands the test of time. Contact us today to learn more about our exterior improvement services and how we can protect your investment with a quality membrane roofing system. Feel free to share this post on your website or social media channels to educate your customers about the benefits of membrane roofs and the best options available for their structures!
Your roof decking is the structural foundation that supports your roofing materials, playing a crucial role in your home’s overall integrity. Often hidden from view, proper maintenance and inspection of your roof decking are vital for preventing costly damage and ensuring your roof performs as intended. In this post, we’ll discuss what roof decking is, the different types available, signs it should be replaced, and why regular inspections are essential when working on or replacing your roof. What Is Roof Decking? Roof decking is the flat surface installed over your home’s rafters or trusses, serving as the base for the roofing system. It supports everything from underlayment to shingles or other roofing materials, ensuring a smooth and stable surface for the roof’s exterior finish. Without a solid deck, even the highest-quality roofing materials can fail, leading to leaks, water damage, and compromised structural integrity. Types of Roof Decking The most common types of roof decking include: - Plywood: Often used in residential construction, plywood (such as CDX plywood) is known for its strength and affordability. It’s widely used as a decking material because it provides a sturdy, consistent surface for roofing materials. - Oriented Strand Board (OSB): OSB is made from compressed wood strands and resin. It’s a popular alternative to plywood due to its cost-effectiveness and structural performance, though its resistance to moisture can vary based on quality and installation. - Engineered Wood Products: Some modern roofs use specialized engineered decking products designed for enhanced durability and moisture resistance. These products are often used in areas where weather conditions are more extreme. Each type has its benefits and limitations, so the choice often depends on regional building codes, budget, and the specific needs of the roofing project. When Should Roof Decking Be Replaced? While your roof decking isn’t something you see every day, several signs can indicate it’s time for a replacement: - Water Damage or Leaks: Repeated or severe water leaks can lead to rot and deterioration of the decking. If you notice water stains on ceilings or signs of moisture damage in your attic, the decking may be compromised. - Visible Rot or Mold: During a roof inspection, if the decking shows signs of rot, mold, or mildew, it’s a clear indicator that the material has degraded and needs replacement. - Sagging or Warping: A sagging roof deck is a serious warning sign. This can be caused by prolonged water exposure or structural issues, and it often necessitates immediate attention. - Post-Storm Damage: After significant storms or hail events, it’s important to inspect your roof decking for damage. Even if your shingles appear intact, underlying damage might have weakened the deck. - Age and Wear: Over time, natural wear and tear, combined with environmental exposure, can degrade roof decking. If your home is older or your roof has been in place for decades, it might be time to consider an upgrade as part of your roof replacement. The Importance of Inspecting Roof Decking Regular inspections of your roof decking are essential for several reasons: - Ensuring Structural Integrity: The decking is the backbone of your roof. A weak or damaged deck can lead to roof failure, making regular inspections critical for early detection of potential issues. - Preventing Further Damage: Identifying problems early—such as rot or water infiltration—allows you to address them before they lead to more extensive damage, protecting your home’s overall structure. - Informing Repair Decisions: When a roof repair or replacement is planned, inspecting the decking ensures that any underlying issues are addressed. This step can prevent future repairs and ensure that your new roof has a solid, secure base. - Meeting Building Codes: Many local building codes require that any roof replacement includes an inspection of the underlying decking. This ensures that the entire roofing system meets current safety and performance standards. Final Thoughts Your roof decking may be out of sight, but it shouldn’t be out of mind. Regular inspections and timely replacements of damaged decking not only protect your investment but also safeguard the overall integrity of your home. Whether you’re planning a roof repair or a complete replacement, always include a thorough inspection of the decking in your maintenance checklist. If you suspect your roof decking might be compromised or need advice on whether it’s time for a replacement, contact us at 302-386-7222 . We proudly serve Delaware and Maryland and are here to ensure your home remains safe, secure, and beautiful. Feel free to reach out for a professional inspection or to learn more about our exterior improvement services!
In Delaware and Maryland, a roof’s lifespan typically depends on the material, installation quality, and how well it’s maintained. Here are some general guidelines: • Asphalt Shingles: 20 to 30 years, with premium options sometimes lasting up to 35 years. • Metal Roofs: 40 to 70 years due to their durability. • Tile or Slate Roofs: 50 years or more if properly installed and maintained. Factors That Can Reduce Your Roof’s Lifespan Even with quality materials, certain factors can shorten the life of your roof: - Harsh Weather Conditions: High winds, hail, heavy rain, and snow can cause gradual damage. - UV Exposure: Constant sun exposure can break down roofing materials, especially asphalt shingles. - Poor Maintenance: Neglecting regular cleaning, debris removal, and timely repairs can lead to moss, algae growth, and water damage. - Improper Installation: If not installed according to manufacturer specifications or building codes, the roof is more vulnerable to early deterioration. - Neglected Repairs: Small issues, like missing shingles or damaged flashing, can escalate if not promptly addressed. - Ventilation Issues: Poor attic ventilation leads to excessive heat build-up, which can deteriorate roofing materials faster. - Moisture Accumulation: Inadequate insulation or faulty underlayment can allow moisture to get trapped, leading to rot and mold growth. Signs It’s Time for a New Roof Keep an eye out for these warning signs that suggest it might be time for a roof replacement: - Frequent Leaks: Recurring leaks, water stains, or moisture issues inside your home indicate a failing roof. - Missing or Damaged Shingles: Widespread missing, cracked, or curling shingles signal that your roof’s protective layer is deteriorating. - Granule Loss: For asphalt roofs, visible granules in gutters or on downspouts mean the shingles are wearing out. - Sagging Roof Deck: A sagging or uneven roof deck is a serious red flag and may indicate structural damage. - Advanced Age: If your roof is nearing or has exceeded its expected lifespan, it’s a good time to consider a replacement. - Increased Energy Bills: A spike in energy costs might suggest issues with insulation or ventilation, often tied to roofing problems. - Visible Post-Storm Damage: If your roof shows significant damage after a storm, such as cracked or broken shingles and compromised flashing, it’s time to get it inspected. Regular inspections, especially after severe weather events, can help catch issues early. If you notice any of these signs, it’s wise to consult a professional roofing contractor. Alpha Roofing & Siding Inc. we offer comprehensive roof inspections and can help you determine whether repairs are sufficient or if a full replacement is necessary. Feel free to contact us today for a free consultation and let us help you protect your home against the elements!
Keeping your roof clean not only enhances your home’s curb appeal but also extends the life of your roofing materials. Whether you’re a DIY enthusiast or planning to hire professionals, here are some essential roof cleaning tips, the right tools for the job, and additional maintenance advice to keep your roof in top shape. 1. Why Clean Your Roof? - Prevent Damage: Debris, moss, algae, and lichen can trap moisture, leading to premature wear and even roof leaks. - Maintain Appearance: A clean roof improves your home’s overall look and can boost property value. - Extend Lifespan: Regular cleaning and maintenance help preserve roofing materials, ensuring your investment lasts longer. 2. Roof Cleaning Tips A. Safety First - Use a Sturdy Ladder: Always use a well-maintained ladder with a secure base and consider having someone spot you. - Wear Proper Gear: Non-slip shoes, gloves, and eye protection are essential. - Avoid High Winds: Choose a calm day for roof cleaning to minimize the risk of falls or debris flying. B. Assess Before You Clean - Inspect Your Roof: Check for damaged or missing shingles, worn-out flashing, or any signs of structural issues. - Test Cleaning Solutions: If you’re using chemicals, test them on a small, inconspicuous area first. C. Choose the Right Cleaning Method - Soft Washing: This method uses low-pressure water combined with eco-friendly cleaning solutions to remove moss and algae without damaging shingles. - Manual Removal: For areas with heavy moss buildup, gently brush it off using a soft-bristle brush. Avoid using wire brushes or high-pressure power washers, which can damage roofing materials. - Chemical Treatments: Use roof cleaning solutions designed to break down algae and moss. Always follow manufacturer instructions and rinse thoroughly. 3. Tools for Roof Cleaning - Ladder and Ladder Stabilizer: A sturdy ladder with a stabilizer can help provide a secure working platform. - Garden Hose with a Spray Nozzle: Allows you to control water pressure when rinsing off cleaning solutions. - Soft-Bristle Brushes: Ideal for gently scrubbing away moss, algae, or debris. - Eco-Friendly Cleaning Solutions: Look for products that are safe for your roof and the environment. - Extension Poles: These can be used with brushes or sprayers to reach higher areas without constantly climbing up and down. - Safety Harnesses: When working on steep roofs, consider using a safety harness to reduce the risk of falls. 4. Additional Maintenance Tips - Regular Inspections: Schedule an annual roof inspection to catch issues early. This is especially important after severe weather. - Clean Gutters: Ensure gutters and downspouts are free of leaves and debris, as clogged gutters can cause water to back up onto the roof. - Trim Overhanging Branches: Keeping trees trimmed back from your roof reduces the amount of debris and minimizes the risk of damage during storms. - Professional Help: If your roof is steep or you’re uncomfortable with heights, consider hiring professionals who specialize in roof cleaning and maintenance. 5. Conclusion A clean roof is vital for maintaining your home’s structural integrity and aesthetic appeal. By following these roof cleaning tips, using the right tools, and scheduling regular maintenance, you can protect your investment and enjoy a beautiful home exterior for years to come. If you have any questions or need professional assistance with roof cleaning or other exterior improvements, don’t hesitate to contact us at 302-386-7222 We proudly serve Delaware and Maryland, helping homeowners keep their roofs—and homes—in peak condition. Feel free to reach out if you’d like more tips or need help scheduling a roof inspection!
When a storm hits, the damage to your home’s exterior can be overwhelming. At Alpha Roofing & Siding , we understand that navigating the aftermath of severe weather can be stressful—especially when it comes to filing insurance claims. As a trusted exterior improvement company located in Delaware and proudly serving Maryland, we’re here to help you restore your home and ease the insurance process. Understanding Storm Damage Storms can wreak havoc on your home, causing issues that aren’t always immediately visible. Common types of storm damage include: - Roof Damage: High winds and heavy rain can lift shingles, compromise flashing, or even cause leaks. Even if your roof looks fine at first glance, hidden damage may lead to costly repairs later. - Siding and Window Damage: Debris and water intrusion can damage your siding, windows, and doors—leading to further deterioration and increased energy costs. - Gutter and Drainage Problems: Blocked or damaged gutters can result in water pooling around your foundation, potentially causing structural issues. How We Help You Through the Insurance Process Filing an insurance claim after storm damage doesn’t have to be a hassle. Our experienced team is well- versed in working with insurance companies to ensure you get the coverage you deserve. Here’s how we assist you every step of the way: 1. Thorough Inspection and Documentation: Our expert technicians conduct a comprehensive inspection of your property, documenting all visible and hidden damage. High-resolution photographs and detailed reports provide a solid foundation for your insurance claim. 2. Assistance with Claim Filing: Once the damage is documented, we help you compile the necessary paperwork. We submit your claim to the appropriate division at Alpha Roofing & Siding Inc., where a dedicated Senior Project Manager oversees your file from start to finish. 3. Direct Communication with Insurance Adjusters: We take the stress out of dealing with insurance companies by communicating directly with your adjuster. In some cases, your insurer might contact you directly—but rest assured, we’re on hand to clarify any questions and ensure the process moves forward smoothly. 4. Guidance Through Approval: Our roofing experts meet with your insurance adjuster to review the damage, discuss repair options, and explain our process—including the selection of materials and scheduling of repairs. We work hard to secure a fair assessment and get your claim approved. 5. Project Coordination and Completion: After approval, we schedule your repair work, order materials, and deploy our skilled crews to restore your home. We ensure that all work meets both local and state building codes and that your home is returned to a safe, beautiful condition. Why Choose Us? -Local Expertise: Based in Delaware and serving Maryland, we have in-depth knowledge of regional weather patterns and building codes. - Comprehensive Service: From inspection to project completion, we handle every step of the process so you can focus on getting your life back to normal. - Customer-Centric Approach: Our goal is to alleviate the stress of storm damage by providing clear communication, quality workmanship, and reliable customer service. Don’t Wait—Get a Free Inspection Today! If your home has experienced storm damage, early intervention is crucial. Contact us for a free, no- obligation inspection. Our team will assess the damage, guide you through the insurance claim process, and set you on the path to a restored home. Call us at 302-386-7222 or fill out our online form to schedule your appointment today. At Alpha Roofing & Siding Inc. we’re here to help you weather any storm. --- By providing expert guidance through the insurance process and delivering top-quality repairs, we help ensure that your home remains safe and beautiful—no matter what the weather brings. Feel free to reach out with any questions or to learn more about our services!
When homeowners think about increasing the value of their property, they often focus on renovations like kitchen upgrades, bathroom remodels, or landscaping improvements. However, one of the most effective—and often overlooked—ways to boost your home’s value is by installing a new roof. Not only does a new roof enhance curb appeal, but it also improves energy efficiency, enhances safety, and increases resale value.
When getting a roofing estimate, it's important to know what to expect so you can make an informed decision. Here are some key things to look for during the process:
Keeping your gutters in good shape is essential for protecting your home from water damage. However, many homeowners make mistakes that can lead to costly repairs. Here are: Five Gutter Maintenance Mistakes to avoid 1. Neglecting Regular Cleaning One of the biggest mistakes homeowners make is not cleaning their gutters regularly. Leaves, dirt, and debris can clog gutters, leading to overflow, water damage, and even foundation issues. How to avoid it: Clean your gutters at least twice a year (Spring and Fall). If you have overhanging trees, consider cleaning them more frequently. Install gutter guards to reduce debris buildup. 2. Ignoring Small Leaks or Damage A small crack or loose seam might not seem like a big deal, but over time, even minor gutter damage can lead to significant water damage. Water can seep into your home’s siding, foundation, or landscaping. How to avoid it: Inspect gutters regularly for leaks, cracks, and rust. Use gutter sealant or replace damaged sections immediately. Check for sagging gutters that need reinforcement. 3. Not Checking Downspouts for Clogs Many homeowners clean their gutters but forget about the downspouts, which are crucial for directing water away from the home. A clogged downspout can cause gutters to overflow. How to avoid it: Flush downspouts with a hose after cleaning the gutters. Use a plumber’s snake or pressure washer to clear tough clogs. Make sure downspouts extend at least 5 feet away from the foundation. 4. Improperly Installing or Sloping Gutters Gutters need the right slope to ensure proper drainage. If they’re too flat, water won’t flow correctly and will pool, leading to rust, leaks, and overflow. How to avoid it: Gutters should have a slope of about 1/4 inch per 10 feet toward the downspout. If water pools in your gutters, they may need to be re-pitched. Hire a professional if you’re unsure about installation. 5. Forgetting to Check for Pest Infestations Clogged or neglected gutters can attract pests like mosquitoes, birds, rodents, and insects, which can cause further damage. How to avoid it: Remove debris where pests can nest. Look for signs of pest activity, like droppings or nests. Seal any openings in gutters where animals could enter. By avoiding these common gutter maintenance mistakes, you can prevent costly water damage and extend the lifespan of your gutter system. Would you like any recommendations on gutter guards or professional cleaning services?
BUSINESS HOURS
- Monday
- -
- Tuesday
- -
- Wednesday
- -
- Thursday
- -
- Friday
- -
- Saturday
- -
- Sunday
- Closed